Counting the Sources of Pores in Aluminum Alloy Die Casting Process

　　Aluminum alloy die-casting technology has never been a mature process, and there are always some defects in the production of aluminum alloy die-casting parts. The difference is only a matter of how many, and porosity is an unavoidable defect in aluminum alloy die-casting parts. Next, let's take a closer look at the sources of porosity in aluminum alloy die-casting engineering.

　　The main sources of porosity in aluminum alloy die-casting process are as follows: one is the gas trapped in the metal liquid during the filling process, which cannot escape from the die-casting mold cavity in time. These gases will form bubbles in the metal liquid and become porosity after cooling and forming; One type is the porosity caused by volume shrinkage during the formation of aluminum alloy die-casting parts; One is that the gas contained in the molten metal of aluminum alloy has not been completely removed; One reason is that the poor design of aluminum alloy die-casting molds leads to the inability to discharge gases from certain parts; One type is caused by excessive wall thickness in die-casting parts, and these pores are mostly located inside the die-casting parts.

Read recommendations:

aluminum door frame extrusions

aluminum stamping parts

aluminum electronic enclosures boxes

sheet metal stamping factory process.Die Casting of Crystal Gifts

What are the materials commonly used for shielding frames and covers?