slim profile aluminium windows

　　Hardness Testing Methods for Die-Cast Products

　　Hardness is an important mechanical property of die-cast products. It determines the resistance of the material to indentation and abrasion. There are several methods for testing the hardness of die-cast products.

　　1. Brinell Hardness TestThe Brinell hardness test is one of the most common methods for measuring the hardness of metals. In this test, a hardened steel ball is pressed into the surface of the die-cast product with a known force. The diameter of the indentation is measured, and the Brinell hardness number is calculated based on the applied force and the diameter of the indentation. This test is suitable for testing large and thick specimens.

　　2. Rockwell Hardness TestThe Rockwell hardness test is another widely used method for measuring hardness. It uses a diamond cone or a hardened steel ball indenter and measures the depth of penetration under a specific load. The Rockwell hardness number is determined based on the depth of penetration and the scale used. This test is quick and easy to perform and is suitable for testing a wide range of materials.

　　3. Vickers Hardness TestThe Vickers hardness test uses a diamond pyramid indenter and measures the diagonal length of the indentation. The Vickers hardness number is calculated based on the applied force and the diagonal length of the indentation. This test is suitable for testing thin specimens and materials with a wide range of hardness values.

　　4. Microhardness TestingMicrohardness testing is used to measure the hardness of small areas or individual grains in a die-cast product. It uses a very small indenter and a low applied force. Microhardness testing can provide detailed information about the microstructure and mechanical properties of the material.

　　different hardness testing methods can be used to measure the hardness of die-cast products depending on the specific requirements and characteristics of the material. By performing hardness tests, manufacturers can ensure that their die-cast products meet the required mechanical properties and quality standards.

Read recommendations:

aluminum project box enclosure

Projector Housing

LED Cold Forged Downlight Radiator

A small method to prevent hot cracking of aluminum alloy die-casting parts

How to check whether aluminum alloy die-casting molds in die-casting production are qualified.2020 series aluminum extrusion