precision metal fabrication.Maintenance and upkeep of die-casting machines by die-casting factories

　　The die-casting machine of Dongguan Zinc Alloy Die Casting Plant is the basic guarantee for die-casting work and an important link in the production and use process of enterprises. Its performance affects the production efficiency and brand influence rate of enterprises.

　　The first step in maintaining and upkeep the die-casting machine is to ensure personal safety. Only by following the correct operating procedures can operators protect themselves and maintain the machine equipment well. For example, in the event of an emergency, the machine must be immediately shut down, the power supply must be turned off, and emergency treatment and repair must be carried out. Before starting up, check whether the lubricating oil in the lubricating oil tank is sufficient and check the oil temperature. After starting up for a period of time, check the temperature of the cooling water and hydraulic oil irregularly. Regularly check the condition of the oil suction filter and filter element. Electric motors should be cleaned and maintained every six months. During machine operation, it is prohibited to place debris on the steel strip. Regularly clean the cooling filter of the electric motor. When the machine is turned off, clean the machine and protect the exposed surface parts, such as using rust inhibitors.

Read recommendations:

280mm aluminum radiator

Speaker Enclosure

2x2 aluminum extrusion

What are the key points of die casting processing.rapid prototyping sheet metal

Zinc alloy die castings are widely used