aluminum window extrusions suppliers.Safety precautions for using die casting machines

　　Die casting machine in use is a certain risk, zinc alloy die casting plant in use for the protection of the operator set of code of practice and precautions, if there is no such a set of relevant provisions, then in the operation may be dangerous, next we understand the use of die casting machine safety precautions it.

　　First, you can not remove the safety door at will. Safety protective door can prevent liquid splashing injury accidents, it is a protective measure to protect the operator, can reduce injury.

　　Second, before starting the machine, check whether there are items within the scope of the machine or whether there are other relevant personnel close to the machine, and then the machine can be used after confirmation.

　　3, in strict accordance with the relevant operation of the die-casting machine, keep the electric box clean, clean and dry, to prevent line damage and safety accidents.

　　4. If the personnel leave the machine for too long, the oil pump should be stopped to prevent the accident from being remedied.

　　5. When the machine is shut down for a long time, it should be thoroughly cleaned and kept clean.

Read recommendations:

copper aluminum heat sink

t slot extruded aluminium

aluminum heatsink extrusion profiles

sheet metal pressed parts.Do pre-mold treatment

Customized zinc alloy die-casting parts.aluminium t track extrusions