Personnel inspection of zinc alloy die-casting parts.precision stamping manufacturer

　　Zinc alloy die castings are often affected by materials, processes, and other factors during production, resulting in defects and the formation of defective die castings. In order to prevent the occurrence of defective die castings, production control is necessary.

　　The inspection standards are closely related to the work of various departments and relevant personnel. The die-casting workshop should be responsible for inspecting and screening the die-casting parts, eliminating defective die-casting parts, and providing timely feedback when serious quality problems are found in the die-casting parts. There are many independent inspection methods in the die-casting workshop. 1. Before the die-casting operation begins, the staff should adhere to the principle of 5S to rectify and clean the work site.

　　2. According to the "Nonconforming Criteria Table for Die Casting Products", quality inspection shall be carried out on die castings, and strict screening shall be carried out and a quality inspection form shall be filled out for record keeping. 3. When defective die castings are found, they should be placed in a designated location and separated from the good ones. Apart from the die-casting workshop, IQC is responsible for the inspection of incoming materials and sequential die-casting products, filling out relevant quality reports and providing feedback.

　　The inspection of zinc alloy die-casting personnel can strengthen the quality standards of die-casting parts, thereby strengthening the production control of die-casting

Read recommendations:

Liquid Cooling Plate

ip67 aluminum waterproof enclosure

aluminium heatsink profile

custom stamped metal parts.Is zinc alloy die-casting just looking dirty

The hardness of aluminum alloy die-casting parts does not meet customer requirements.bespoke sheet metal fabrication